| |
| |
|
|
|
|
|
|
|
|
| |
Examples for possible machine configurations
Contact roller / Brush roller units
Application: Calibration (sanding to final thickness)
Industry: parquet floor and solid wood
|
|
Contact roller / Longitudinal unit / Brush roller
Application: calibration with following fine sanding
Industry: parquet floor and solid wood
|
|
Contact roller / Contact roller / Longitudinal unit / Brush roller
Application: calibration with higher stock removal resp. faster feed speed with following fine sanding
Industry: parquet floor and solid wood
|
|
Contact roller / Cross unit / Longitudinal unit / Brush rollers
Application: Sanding centre, all applications possible, calibration, cross sanding (cut off annual rings hard and soft and across the grain direction), fine sanding, lacquer intermediate sanding (longitudinal belt with frequency converter)
|
|
Contact roller / Cross unit / Longitudinal unit / Longitudinal unit / Brush rollers
Application: Line machine for calibration, cross sanding and finish fine sanding also for higher feed speeds in one sanding machine
|
|
Bottom machine: Contact roller / Longitudinal unit - U
Top machine: Contact roller / Cross unit / Longitudinal unit / Longitudinal unit / Brush rollers
Application: Sanding line for both-sided sanding of workpieces in line, calibration and fine sanding from below, consequently exact surface, calibration, cross and fine sanding from above.
|
|
|
|
|
