HGM .2

HGM .2 is the compact solution for deburring and edge rounding of all metal sheets. Its contact roller unit with its rubber-coated steel roller easily removes any surface burr. The subsequent disk brush unit RUT rounds the work piece edges and generates radii of up to 2 mm.

Processing units

HGM .2 is equipped with a contact roller unit for deburring and a RUT disk brush unit for rounding the work piece edges.

Contact roller unit

The contact roller unit of the HGM .2 reliably removes any burr and generates a uniform structure on the surface of the work pieces. The edges can be rounded in this process, too.

The contact roller units work with a rubber-coated steel roller (standard hardness 60° Shore) with a diameter of 250 mm (9.84 inch) and can be equipped with frequency controlled drive motors with up to 22 kW (29.5 hp). Sanding belt speeds between 1.7 m/s and 28 m/s are possible. The surface of the roller is grooved in a spiral shape. This allows a better cooling of the roller and makes it easier to extract the generated abrasive dust.

RUT Disk Brush Unit

RUT Disk Brush Unit

The RUT unit can be used to generate radii of 2 mm and more without any difficulty. This is the result of an intensive co-operation with different producers of abrasives and is realized using newly developed abrasive materials.

The RUT disk brush unit consists of 18 disk brushes. Their arrangement allows even processing of all areas, even at embossments of up to 30 mm, in different directions.

 

The frequency controlled drive system permits an infinitely variable regulation of the disk brushes rotation speed up to 1,500 rpm and their orbital velocity transversally to the feed direction.

Technical Data

Contact roller
Contact roller
Disk brush unit RUT
Disk brush unit RUT
(Sanding belt) Dimensions 2.150 x 1.350 mm
2.620 x 1.350 mm
Drive performance 22 kW inverter Brush rotation: 22 kW inverter
Brush movement: 2.2 kW inverter
Belt speed 1 - 20 m/s Brush rotation: 160 - 1,500 rpm
Brush movement: 5 - 25 m/min
Extraction volume 30,5 m³/min
Extraction connection Ø 180 mm 2 x Ø 160 mm
Air velocity 20 m/s 20 m/s

Contact roller
Contact roller

(Sanding belt) Dimensions

2.150 x 1.350 mm
2.620 x 1.350 mm

Drive performance

22 kW inverter

Belt speed

1 - 20 m/s

Extraction volume

30,5 m³/min

Extraction connection

Ø 180 mm

Air velocity

20 m/s

Disk brush unit RUT
Disk brush unit RUT

(Sanding belt) Dimensions

Drive performance

Brush rotation: 22 kW inverter
Brush movement: 2.2 kW inverter

Belt speed

Brush rotation: 160 - 1,500 rpm
Brush movement: 5 - 25 m/min

Extraction volume

Extraction connection

2 x Ø 160 mm

Air velocity

20 m/s

Machine Data
Dimensions (L x W x H)
Dimensions (L x W x H)
Weight
Weight
Feed speed
Feed speed
Suction volume
Suction volume
2 Units 1.960 x 2.260 x 2.250 mm 4.000 kg 0.5 - 5 m/min 11 m³/min

Dimensions (L x W x H)
Dimensions (L x W x H)

2 Units

1.960 x 2.260 x 2.250 mm

Weight
Weight

2 Units

4.000 kg

Feed speed
Feed speed

2 Units

0.5 - 5 m/min

Suction volume
Suction volume

2 Units

11 m³/min

Send request

Send request on HGM .2

If you are interested in our deburring and edge rounding machine HGM .2 send us a request. Our sales team will contact you immediately.

Your request has successfully been send to Heesemann. Our sales team will contact you immediately.

Address

Karl Heesemann
Maschinenfabrik GmbH & Co. KG
Reuterstraße 15

32547 Bad Oeynhausen / Germany

Phone: +49 5731 188 0
Fax: +49 5731 3571
Google MapsKarl Heesemann
Google Maps

Contact

We appreciate if you contact us.

Requests    requests@heesemann.de
Careers      careers@heesemann.de
Media         media@heesemann.de
In general  info@heesemann.de
© Karl Heesemann Maschinenfabrik GmbH & Co.KG
Wir benutzen Cookies um die Nutzerfreundlichkeit der Webseite zu verbessen. Durch Deinen Besuch stimmst Du dem zu.
Verstanden