HGM .2
HGM .2 is the compact solution for deburring and edge rounding of all metal sheets. Its contact roller unit with its rubber-coated steel roller easily removes any surface burr. The subsequent disk brush unit RUT rounds the work piece edges and generates radii of up to 2 mm.
Processing units
HGM .2 is equipped with a contact roller unit for deburring and a RUT disk brush unit for rounding the work piece edges.
Contact roller unit
The contact roller unit of the HGM .2 reliably removes any burr and generates a uniform structure on the surface of the work pieces. The edges can be rounded in this process, too.
The contact roller units work with a rubber-coated steel roller (standard hardness 60° Shore) with a diameter of 250 mm (9.84 inch) and can be equipped with frequency controlled drive motors with up to 22 kW (29.5 hp). Sanding belt speeds between 1.7 m/s and 28 m/s are possible. The surface of the roller is grooved in a spiral shape. This allows a better cooling of the roller and makes it easier to extract the generated abrasive dust.
RUT Disk Brush Unit
The RUT unit can be used to generate radii of 2 mm and more without any difficulty. This is the result of an intensive co-operation with different producers of abrasives and is realized using newly developed abrasive materials.
The RUT disk brush unit consists of 18 disk brushes. Their arrangement allows even processing of all areas, even at embossments of up to 30 mm, in different directions.
The frequency controlled drive system permits an infinitely variable regulation of the disk brushes rotation speed up to 1,500 rpm and their orbital velocity transversally to the feed direction.
Technical Data
 Contact roller
|
 Disk brush unit RUT
|
|
| (Sanding belt) Dimensions |
2.150 x 1.350 mm 2.620 x 1.350 mm |
|
| Drive performance | 22 kW inverter |
Brush rotation: 22 kW inverter Brush movement: 2.2 kW inverter |
| Belt speed | 1 - 20 m/s |
Brush rotation: 160 - 1,500 rpm Brush movement: 5 - 25 m/min |
| Extraction volume | 30,5 m³/min | |
| Extraction connection | Ø 180 mm | 2 x Ø 160 mm |
| Air velocity | 20 m/s | 20 m/s |
|
Contact roller
(Sanding belt) Dimensions2.150 x 1.350 mm
2.620 x 1.350 mm Drive performance22 kW inverter
Belt speed1 - 20 m/s
Extraction volume30,5 m³/min
Extraction connectionØ 180 mm
Air velocity20 m/s
|
|
Disk brush unit RUT
(Sanding belt) DimensionsDrive performanceBrush rotation: 22 kW inverter
Brush movement: 2.2 kW inverter Belt speedBrush rotation: 160 - 1,500 rpm
Brush movement: 5 - 25 m/min Extraction volumeExtraction connection2 x Ø 160 mm
Air velocity20 m/s
|
| Machine Data |
 Dimensions (L x W x H)
|
 Weight
|
 Feed speed
|
 Suction volume
|
| 2 Units | 1.960 x 2.260 x 2.250 mm | 4.000 kg | 0.5 - 5 m/min | 11 m³/min |
|
Dimensions (L x W x H)
2 Units1.960 x 2.260 x 2.250 mm
|
|
Weight
2 Units4.000 kg
|
|
Feed speed
2 Units0.5 - 5 m/min
|
|
Suction volume
2 Units11 m³/min
|
Send request on HGM .2
If you are interested in our deburring and edge rounding machine HGM .2 send us a request. Our sales team will contact you immediately.
Your request has successfully been send to Heesemann. Our sales team will contact you immediately.
