Releases

24.10.2017
A special machine for crane mats
BAV6-OU.jpg

A machine Heesemann does not build every day is actually waiting for its delivery to the US. Heesemann BAV 6 offers cross sanding of the top and the bottom at a working width of 8.5 feet. It will be used for roughening crane mats. The 30.8 feet long abrasive belts are working with a sanding belt speed of up to 30 meter per second.

 

Crane mats are used to build safe access roads for site vehicles on rough terrain.

13.10.2017
Heesemann profiRounder at EMO 2017

EMO Hannover is the world's premier trade fair for the metalworking sector. Heesemann has made use of this most international fair to present profiRounder to an international audience. Of course the machine has been ready for demonstration, so the many interested visitors have had the opportunity to get an idea of the processing quality of the profiRounder.

 

In this year profiRounder will be presented again at Blechexpo in Stuttgart (Hall 1, booth 1201). Join us at this fair and get convinced of the profiRounder by Heesemann.

10.10.2017
Heesemann quality starts belowground

The consistently high quality of the sanding results of a Heesemann sanding machine relies on a production with highest precision. In order to preserve this precision in our production and to further expand it, Heesemann has invested in a new Soraluce machining center. The Soraluce FP 12000 will allow us to not only produce with an even better surface quality but also with a significantly increased productivity. To install the new machining center no pains have been spared as a new 16 feet deep baseplate has been installed. Therefore the prerequisites for the well-known high-quality of a Heesemann sanding machine begin deep below the floor of our production facility.

04.10.2017
100 orbital scratch removal units OSR - The swinging prodigy
Schwingschleifaggregat_04.jpg

The orbital scratch removal unit OSR has been established in the market in an impressive manner. Especially in North America and Asia the OSR is utilized to an increasing degree. Heesemann has more than 100 of these units in operation. The OSR is used to eliminate sanding traces that are generated in particular at sanding crosswise to the grain direction. The unit achieves such a fine surface so no sanding traces are visible at all.

04.10.2017
100 disk brush units RUT - Our disk brush units are used on all continents
RUT_29.jpg

The Heesemann disk brush unit RUT enjoys growing popularity with now more than 100 RUTs scattered across all continents. The RUT is used to break work piece edges and to sand lower areas of work pieces that cannot be sanded with wide or long belt units independently of their orientation on the transport. The RUT is also used for structuring with metal or Tinex wire brushes. For especially intensive structuring Heesemann has presented the reinforced version RUT-St at LIGNA that is also used in the deburring machines.

27.09.2017
85 years Heesemann - Save the date
85_Jahre.jpg

85 years Heesemann sanding machines - this remarkable anniversary will be celebrated by Karl Heesemann Maschinenfabrik next year. 85 years Heesemann - that means 85 years of innovative technologies, highest production quality and awesome sanding results. Therefore Heesemann has become the world market leader in the scope of wood sanding machines for furniture, floor and panel industries as well as sophisticated handicraft and has always been the driving force in the development of sanding technology.

 

We want to celebrate this respectable anniversary with our employees, distributors, partners, customers and friends on May 9th, 2018. Save the date so you do not miss this event. We will release further information in time.

08.08.2017
Further KSA machines heading for Turkey
P1040723.JPG

A total of 60 tons of material from Heesemann are heading towards Turkey.

 

Heesemann has sold two more heavy sanding machines from KSA 8 series to Turkey within a few weeks.

One unit is already on its way to the country at the Bosporus. Another machine will be delivered at the end of the year.

 

"Even under challenging political circumstances we can further strengthen our long lasting partnership with our customers and our representation in Turkey and prove the quality of the seal "made in Germany" for further decades" to come, Torsten Legler declares.

17.07.2017
HSM - a success story continues
HSM_26.jpg

Heesemann has sold more than 80 machines to satisfied customers world-wide since presentation of the HSM series.

 

"We expect further orders for this machine series in the next weeks so we hopefully aim at our goal to achieve 100 machines by 2018. When we presented the HSM series at LIGNA 2015 we did not expect such an overwhelming market response - world-wide", Christoph Giese (Managing Director) explains.

 

The machines have been delivered to the USA, Canada, China, South Africa and even more far reaches like the Philippines.

03.07.2017
Another award for profiRounder
pf-Slider-Perspektive.jpg

profiRounder has been awarded with the RedDot Design Award. The ground-breaking modular concept for sanding and edge rounding of metal parts already proves its competence at our customers.

 

A customer based in Melle, Lower Saxony utilizes even two machines in continuous operation. We will report on the sanding results and the satisfaction of Heesemann customers in the scope of metal processing continuously.

 

Heesemann profiRounder

15.06.2017
Not only fine sanding is the core competence of Heesemann
LSM8C.jpg

With the presentation of the universal LSM 8-C Heesemann has presented a heavy duty but simplified calibration machine at LIGNA 2017 in Hanover. This machine series expands the portfolio of fine sanding machines with a further industrial solution for pure calibration of work pieces from Heesemann. The machine is offered in two configurations - a three-head version and a heavy four-head version for complete processing.

 

In combination with the OSR orbital sanding units Heesemann now offers the complete solution for sophisticated processing - initially focused on the markets in North America and Europe.

 

"We are going to realize first projects now in the US and Eastern Europe and get excited about the positive response from the markets", Torsten Legler (Sales Director) and Heinz Grupe (Area Sales Manager) explain.

01.06.2017
What does "Rebuild" from Heesemann mean?
Rebuild_02.jpg

"It is the privilege and an obligation of companies being in the market for many years, like Heesemann, to secure the required measures to allow even the oldest machines to function to the owners' expectation", Michael Schlingmeyer (Service Director) explains.

 

Many Heesemann machines are already 30 years or older and many customers value the quality of their machines every day. Therefore it is important for many customers to secure proper functioning. In 2015 Heesemann has developed a concept for electronical and electrical reconditioning of these machines.

 

"The tremendous demand from the market field proves us to be right on developing a sustainable control concept even for machines having left our factory decades ago", Schlingmeyer explains.

 

At LIGNA 2017 Heesemann presented a retrofitting concept for sanding machines live at an older machine. The response has been impressive since with small effort critical components can be replaced with state-of-the-art componentry.

 

Heesemann Rebuild

12.01.2017
HSM number 50 has already been delivered
HSM-50-Bauformat.jpg

At LIGNA 2015 Heesemann has introduced HSM - a completely new machine series for builders/trade contractors and industrial companies with smaller production volumes. Since that time HSM enjoys great popularity. In January HSM serial number 50 has been delivered to BAUFORMAT Küchen GmbH & Co. KG in Löhne (Germany).

 

Bauformat is a company of the Baumann group. The Baumann group has about 800 employees and produces about 115,000 kitchens per year. The group consists of the companies Burger-Küchen based in Magdeburg (Saxony-Anhalt) and Bauformat based in Löhne (North Rhine-Westphalia). Burger-Küchen successfully serves the market for economically priced kitchen while Bauformat is placed in the upper class.

01.02.2016
Heesemann and Kuper reach an agreement of cooperation for important regions in Germany
Gebiet_Kuper.jpg

The once long-lasting and very successful co-operation of both companies will now be continued.

As of now Heesemann sanding machines are distributed by Heinrich Kuper GmbH & Co. KG as well. This agreement as been reached in the course of the reorientation of both companies by their managements.

Kuper distributes Heesemann sanding machines in Lower Saxony, Thuringia, Saxony, Saxony-Anhalt, Brandenburg, Bremen, Berlin and the North and East of North Rhine-Westphalia.

With this cooperation Heesemann extends and completes its dealer network in important regions of Germany.

Address

Karl Heesemann
Maschinenfabrik GmbH & Co. KG
Reuterstraße 15

32547 Bad Oeynhausen / Germany

Phone: +49 5731 188 0
Fax: +49 5731 3571
Karl Heesemann
Google Maps

Contact

We appreciate if you contact us.

Requests    requests@heesemann.de
Careers      careers@heesemann.de
Media         media@heesemann.de
In general  info@heesemann.de
© Karl Heesemann Maschinenfabrik GmbH & Co.KG