Configuration of your Heesemann HSM .2 / .3

HSM series offers 9 standard configurations:
4 configurations for a 2 head machine and 5 configurations for a 3 head machine.

Number of sanding units

HSM .2

HSM .2

HSM .2
Show machine configurations for HSM series with 2 heads
HSM .3

HSM .3

HSM .3
Show machine configurations for HSM series with 3 heads

Configuration of sanding units

R/L

R / L

HSM .2 - R / L
Configuration with one contact roller and one longitudinal sanding unit
R/Lc

R / Lc

HSM .2 - R / Lc
Configuration with one contact roller and one combi unit
L/L

L / L

HSM .2 - L / L
Configuration with two longitudinal sanding units
C/Lc

C / Lc

HSM .2 - C / Lc
Configuration with one cross sanding unit and one combi unit
R/R/L

R / R / L

HSM .3 - R / R / L
Configuration with two contact rollers and one longitudinal sanding unit
R/C/L

R / C / L

HSM .3 - R / C / L
Configuration with one contact roller, one cross sanding unit and one longitudinal sanding unit
R/Lc/L

R / Lc / L

HSM .3 - R / Lc / L
Configuration with one contact roller, one combi unit and one longitudinal sanding unit
C/Lc/L

C / Lc / L

HSM .3 - C / Lc / L
Configuration with one cross sanding unit, one combi unit and one longitudinal sanding unit
C/Lc/Lef

C / Lc / Lef

HSM .3 - C / Lc / Lef
Configuration with one cross sanding unit, one combi unit and one longitudinal sanding unit with chevron belt

Options Unit 1:

Options Unit 2:

Options Unit 3:

General Options

Cleaning brush

Cleaning brush

Cleaning brush with fiber trimming
The machine can be equipped with a cleaning brush in the outfeed of the machine to remove sanding dust from the work pieces.
Work piece suction

Work piece suction

Work piece suction by vacuum
Work pieces are hold on the transport belt by a vacuum. This makes it possible to treat short work pieces.
Work piece cleaning

Work piece cleaning

Work piece cleaning: Ionization and rotating blasting nozzles
To clean work pieces from adhesive sanding dust the machine can be equipped with an ionization and rotating blasting nozzles.
Transport belt cleaning

Transport belt cleaning

Transport belt cleaning
The sanding dust is removed from the transport belt. So the sanding dust not extracted at the sanding units does not gather under the machine.
Battery back-up

Battery back-up

Battery back-up
The battery back-up makes it possible to set the machine in a defined condition and to end sanding belt oscillation in case of power failure.
EnergyManagement System

Ener­gy­Ma­na­ge­ment System (EMS)

EnergyManagement System EMS
The velocity of the sanding units is automatically reduced if no work pieces are in the machine. Energy consumption decreases significantly.
Roller table at the infeed

Roller table at the infeed

Roller table at the infeed
For easier feeding a roller table can be installed in front of the machine.
Roller table at the outfeed

Roller table at the outfeed

Roller table at the outfeed
For easier work piece removal after the sanding process a roller table can be installed behind the machine.
Effect sanding

Effect sanding

Effect sanding program for vintage look
A special sanding program to generate outstanding sanding effects in feed through production.

Contact data








* required

Address

Karl Heesemann
Maschinenfabrik GmbH & Co. KG
Reuterstraße 15

32547 Bad Oeynhausen / Germany

Phone: +49 5731 188 0
Fax: +49 5731 3571
Karl Heesemann
Google Maps

Contact

We appreciate if you contact us.

Requests    requests@heesemann.de
Careers      careers@heesemann.de
Media         media@heesemann.de
In general  info@heesemann.de
© Karl Heesemann Maschinenfabrik GmbH & Co.KG